Camera control for live & livestream

Your Sony cameras. One screen.

KunzMedia Camera Control [S] controls the Sony cameras of your production centrally from the PC – exposure, focus, recording, presets, photos and live view – and on the BRC-AM7 and FR7 PTZ cameras, the position too. Plus tally from the ATEM video switcher (who is on air?) and control via tablet, Stream Deck or Bitfocus Companion.

KunzMedia Camera Control [S]
Main window of KunzMedia Camera Control [S] in photo mode with five connected cameras, live views, exposure values, presets and motion trigger

Recording

One command.
All cameras.

ALL REC starts recording on every connected camera at once – only after a second tap, to be safe. REC is shown only once the camera reports that it is recording – with its own running time for each camera.

  • Start and stop for all cameras or for each one individually
  • Connection lost? The app reconnects by itself – running recordings stay untouched
  • Closing the app never stops a recording
5/5 online · 0 REC
CAM 1α7C IISTBY
CAM 2FX6STBY
CAM 3FX6STBY
CAM 4FX3STBY
CAM 5α1STBY
Tap twice:
ALL REC

Features

Everything that counts on set.

Every camera gets its own tile – with live view, all values and presets. Control it from the PC, from a tablet or at the press of a Stream Deck key.

Exposure under control

ISO, iris, shutter and Kelvin for every camera – shown only once the camera has confirmed the value. On the FX6 as ISO, gain or EI, depending on the camera setting.

Zoom with speed control

By button or slider, speed 1–8. Optical with a power zoom lens; with prime lenses via Clear Image Zoom or digital zoom.

REC for all

Start and stop all cameras at once – with a second tap for safety – or one at a time. Running time per camera; REC only appears when the camera is really recording.

10 presets per camera

Save, name and recall settings – with a preview image. If the camera is changed afterwards, the preset button shows it. On PTZ cameras, the position is part of it.

Live view & Multiview

On every tile, choose single preview images (easy on the Wi-Fi) or the running live view. Plus the Multiview window: all cameras in a grid of up to 4×4, click into the picture to focus, one camera large in HD, full screen.

Photos & bursts

Single shot or burst at the camera's speed (Lo to Hi+), hold autofocus like a half-pressed shutter button. ALL PHOTO and ALL BURST fire all cameras at once.

Motion trigger

Drag an area in the live view – if something moves there, a photo burst starts automatically. For wildlife, sports and moments you don't want to miss.

Tablet, Stream Deck & Companion

Control in the browser on a tablet or phone – or at the press of a key on a Stream Deck or via Bitfocus Companion. With Companion, the keys also show what is happening (REC, active preset, tally).

Reliable in operation

The app detects lost connections and reconnects by itself. Log and diagnostic report per camera, in case something does get stuck.

New ATEM tally

Connected to your Blackmagic ATEM video switcher, every camera shows whether it is on air: red PGM, green PVW (preview) – on the PC, in the Multiview and large on the tablet. Now also for cameras that are part of a layout with PowerPoint via a second ATEM.

More about tally

PTZ cameras BRC-AM7 and FR7

Presets also recall pan, tilt, zoom and focus – stored in the camera itself. A joystick controller such as the AVMATRIX PKC4000 recalls the same positions with buttons 1–10 as P1–P10 in the app. Recalling in the app also sets ISO, iris, shutter and Kelvin.

More about presets

In use

This is what the control room looks like.

The screenshots show the German interface – the app is also available in English.

Video mode with five cameras, REC and STOP buttons, presets and the window for tablet control and Stream Deck
Video mode: five cameras, ALL REC / ALL STOP, presets with preview images – on the right, the window for tablets and Stream Deck.

Presets

Your look is
back in an instant.

Ten slots per camera for ISO, iris, shutter, Kelvin and zoom – named after a position or scene, with a preview image. One tap, and the camera is back exactly where it was. On the BRC-AM7 and FR7 PTZ cameras, the position is included as well: pan, tilt, zoom and focus.

  • Save with a right-click or a long press
  • If someone changes the camera, the preset button is marked as different
  • Recall also via tablet, Stream Deck or Companion
  • PTZ: P1–P10 are stored in the camera – button 1–10 on a joystick controller (e.g. AVMATRIX PKC4000) recalls the same position
  • Several presets picked in quick succession? The camera moves cleanly to the last one

Photo & motion trigger

The camera fires
when it happens.

Drag an area in the live view and arm the trigger – if something moves there, a photo burst starts. If the whole picture gets brighter or darker, say from a passing cloud, the app filters that out; the sensitivity is adjustable.

Shots per burst
3 – 30
Number of bursts
1× – 20× or ∞
Active for
10 min – 4 h or ∞
Pause after
0 s – 1 min
Sensitivity
1 – 10
Triggers
this camera or all cameras

Focus

Pull focus –
from the control room.

One click into the live view – the camera focuses there, tracks the subject or moves its focus area to that spot. In video and photo mode, on the camera tile, in the Multiview and on the tablet.

  • You choose what a click does: Focus (focus there), Track (track the subject) or Area (move the focus area there – or drag it with mouse or finger)
  • Change focus mode, focus area and face/eye detection right from the control room
  • The camera's focus frames over the live view – green as soon as it is in focus
  • Focus peaking: sharp edges highlighted in color – level low, medium or high, color red, yellow, blue or white, saved per camera
  • Lock per camera – prevents accidental refocusing, from the tablet as well
Live view of a concert stage with a focus frame on the singer
CLICK
PEAKING
LEVEL

Calculated with the same method as in the app: low marks only very sharp edges, high finer ones too. In the app, switch it on in the camera's live view menu or with a right-click in the Multiview – there also for all cameras at once.

ATEM tally

Red means
on air.

Camera Control [S] connects to your Blackmagic ATEM switcher via its IP address. Whenever you cut on the switcher, every camera shows instantly whether it is on air – red PGM – or waiting in preview – green PVW.

  • For every ATEM model – from the ATEM Mini to the Constellation
  • Set once which ATEM input each camera is connected to – or let it happen automatically: input 1 → first camera, input 2 → second …
  • Tally on the camera tile, in the list, in the Multiview and on every tablet
  • Tally view for the tablet at the camera: the whole screen red or green, plus recording status and presets P1–P10
  • Nothing is switched on the switcher – Camera Control [S] only listens

Requirement: the free ATEM Software Control from Blackmagic Design on the PC – it provides the interface to the switcher. The demo on the right is interactive.

in layout
CAM 1α7C II
in layout
CAM 2FX6
in layout
CAM 3FX6
in layout
CAM 4FX3
Video switcher · DemoATEM connected
PGM
PVW

CAM 1 on air · CAM 2 in preview

CAM 2
CAM 2
● REC0:12:34

Layout switcher

Camera and PowerPoint in one picture – and the tally is still right.

Camera and presentation often go on screen together: a second ATEM combines them with its SuperSource – controlled with H2R Layouts, for example – and sends the finished picture to the main switcher via a single input. Camera Control [S] knows which camera is in this layout: when the layout goes on air, that camera turns red too – shown as PGM · Layout.

  • Manual: In the “Layout” tile on the right of the main window, tap which camera is currently in the layout – two cameras or none work too
  • Automatic: Via the IP address of the second ATEM, the app follows along by itself. When H2R Layouts changes the camera, the tally follows instantly
  • If a camera is also switched directly (full screen), its own tally applies
  • Switching also via Stream Deck or Companion; tablets show “in layout”
SuperSource picture of the layout ATEM – arrives at the main switcher as input “Layout”
MAIN SWITCHER · Demo

The layout only turns red or green when its input on the main switcher is on air or in preview – and so does every camera in it.

LAYOUT · second ATEM
on main switcher: input “Layout”
not on air
CAMERA IN LAYOUT

automatic from the layout switcher

Control

On the PC. On the tablet. At the press of a key.

Everything stays in sync – no matter where you press.

Tablet control window with address, PIN area, permissions for tablets and the Stream Deck / Companion section (key and PIN hidden)

Tablet & phone

Scan the QR code, enter the PIN – done. In the browser, nothing to install. On the PC you decide whether tablets may start recordings and save presets.

RECall PHOTOall BURST10 SNAPsave STOPall CAM 1P1 CAM 1P2 CAM 1P3 CAM 1P4 MOTIONarm CAM 2STBY CAM 2P1 CAM 2P2 CAM 2P3 MULTIview

Stream Deck & Bitfocus Companion

Put every function on its own key: REC, presets, photo, burst, snapshot, motion trigger, layout. Companion also keeps polling the status: the key of the active preset lights up, REC turns red as soon as recording starts, and the tally from the ATEM can be shown on the key as well.

GET /api/v1/rec/start?key=…
GET /api/v1/cam/1/preset/2?key=…
GET /api/v1/burst?shots=10&key=…
GET /api/v1/layout/cam/3?key=…
GET /api/v1/status?key=…
→ {"ok":true,"recording":1,"cameras":[
   {"nr":1,"preset":2,"rec":"rec","tally":"pgm", …}]}

Open API

Every command is a simple web address: in Stream Deck with the “Website” action (run in the background), in Companion with the “Generic HTTP” module – or from your own scripts. The status is available as JSON or as short text for key labels. Protected by a key; after several wrong attempts the sender is blocked.

Setup

One network.
Everything connected.

The Windows PC running Camera Control [S] is the hub. The cameras are on the same network via wired LAN or Wi-Fi, tablets simply open the address in the browser, Stream Deck and Companion call web addresses – and the ATEM switcher delivers the tally.

  • Find cameras by searching the network or add them by IP address
  • Cameras with access protection (Sony “Access Authentication”, e.g. FX6) with user, password and fingerprint
  • On the next start, all cameras reconnect automatically
  • PTZ cameras (BRC-AM7, FR7) additionally via VISCA over IP – the same protocol a joystick controller uses
  • ATEM switcher via its IP address – with automatic reconnect; optionally a second ATEM as layout switcher
FX3 · FX6 · α1Wired LAN FR7 · BRC-AM7Wired LAN · VISCA α7C IIWi-Fi FX2 · α6700Wi-Fi Camera Control [S]Windows PC Tablet / phoneBrowser · PIN ATEM switcherTally · IP Stream DeckCompanion · HTTP

Wired LAN Wi-Fi

Cameras

For Sony Cinema Line, Alpha and PTZ.

Camera Control [S] supports the cameras that Sony has approved for remote control (Sony “Camera Remote SDK”). Sony also defines how each camera can be connected:

Connection types per camera model according to Sony
ModelWired LANWi-FiUSBNote
FX3✓✓✓system software 2.00 or later · LAN via USB-C adapter
FX30✓✓✓LAN via USB-C adapter
FX6✓✓–system software 3.00 or later · with Access Authentication · no photo function
FR7✓––PTZ · system software 3.00 or later · position via VISCA over IP
BRC-AM7✓––PTZ · system software 2.01 or later · position via VISCA over IP
α1✓✓✓built-in LAN port
α7C II–✓✓not via wired LAN, not even with an adapter
α6700–✓✓not via wired LAN
FX2–✓✓not via wired LAN
FX5–––not yet approved by Sony for remote control – only possible with a later update

More models from Sony's list (including α1 II, α9 III, α7 IV, α7S III, α7R V, BURANO, ZV-E1) are prepared; the app detects which functions a camera offers when it connects.

Good to know

To be honest.

What Camera Control [S] can't do – or only under certain conditions.

Runs on Windows

The control app needs a Windows PC with a 64-bit processor (x64, not ARM) – developed and tested with Windows 11. Tablets, Stream Deck and Companion access it over the network. For ATEM tally (also with a layout switcher), add the free ATEM Software Control. The app, the tablet view and the API are available in English and German.

Sony only – with current firmware

Supported are the cameras that Sony has approved for remote control; the FX5 is not one of them yet. The FX3 needs at least system software 2.00, the FX6 and FR7 at least 3.00, the BRC-AM7 at least 2.01. For the position of the PTZ cameras, VISCA over IP must be enabled on the camera.

Not every camera can do wired LAN

α7C II, α6700, FX2 and others can only be controlled via Wi-Fi or USB – a USB LAN adapter doesn't change that. The app points this out.

Recording happens in the camera

Camera Control [S] only controls the cameras – video is recorded to the memory cards as usual. For photos, a preview comes to the PC; the originals stay on the memory card.

Photo/video on the mode dial

Many Alpha cameras only switch between photo and video on the camera's mode dial – not remotely. The FX6 has no photo function.

Zoom depends on the lens

Optical zoom only with a power zoom lens. With prime lenses you can still use Clear Image Zoom or digital zoom – if the camera offers them. On the FR7, zoom and focus are only part of the stored position with a power zoom or AF lens.

Live view costs bandwidth

On Wi-Fi, better choose “Preview” (single images) instead of the running live view. For many cameras with live view, wired LAN is the more stable choice.

Tablets only on your own network

The tablet connection is protected by a PIN but not encrypted (http) – meant for your own production network, not for public Wi-Fi.

Stream Deck: bursts with a fixed number of shots

A Stream Deck or Companion key only calls a web address – “fire while held” doesn't exist there. So the key triggers a burst with a fixed number of shots, e.g. 10. The area for the motion trigger is set on the PC.

Click focus needs autofocus

Focus, Track and focus area work with autofocus (AF). With manual focus (MF), the app moves the focus in steps toward near or far. Some cameras block touch focus in certain modes – then the click moves the focus area.

Focus frames come from the camera

The app shows face, eye and AF area the way the camera reports them. The FX6 doesn't send frames over the network – click focus still works.

Focus peaking from the live view

The camera's own focus peaking can't be switched on via Sony's interface – so Camera Control [S] calculates it from the live view, in three levels and four colors. Good for “in focus or not”, not for the finest detail.

KunzMedia

Ready for your next production?

Camera Control [S] is a tool by KunzMedia – photography, video, podcast and livestream. Ask us for a demo or about using it on your project.